This Cindy toilet, does not use water, it burns the toiletcontent after use and leaves only ashes. CLEAN, SAFE, EASY to install.
The built-in fan drives out odours from the toilet and the bathroom, quiet and effective. The breather channel can be led right through an outside wall.
CINDI family Separett can on both hot and cold spots be installed and works perfectly, regardless of the room temperature.
It can be placed on your needs and does not need to be fixed to the wall or floor. The integrated controller with two different programs makes treatment possible on an energy-efficient combustion of the waste. The ash can be used as fertilizer in the garden.
Empty and dealing with waste:
A) Open the hatch at the front of the toilet by the latches on the sides to loosen. Pull the front off it.
B) turn the ash box to the left.
C) pull the ashtray out.
D) make the ash box empty.
Replace the ash box
E) check whether the course in the ash box in the direction of the handgrip. Place the ash box in the slot and slide inside.
F) turn the ash pan to the right so that the ash box is sealed.
Voltage: 230 V
Power: 1 800 W
Recommended fuse: 10 amp
Power consumption: 0.4-1.7 kWh/visit